LDX-020A Grinding Diameter 150-1200MM TCT Circular Saw Blade Front And Rear Angle Grinding Machine
The gear grinding machine is operated correctly:
1,Before operation, you must wear protective equipment, such as safety helmet, protective glasses, protective gloves and protective shoes to ensure the safety of the operator. At the same time, check whether the power plug of the device is firmly connected, whether the power cable is damaged, whether the workbench is stable and stable, and whether the grinding disc is correctly and firmly installed.
2,TCT circular saw blade automatic tooth grinding machine may encounter some common problems in use, such as tooth shape, tooth number is not correct or teeth are not sharp, sawing sound is abnormal, sawing material is not vertical, wave sawing, sawtooth thickness is not equal, sawtooth edge is dark, polluted and so on
3,These problems need to be solved on a case-by-case basis, such as re-grinding teeth, checking and correcting the amount of sawn wood, cleaning and grinding sawtooth structural components.
| Technical parameters: |
| Processing saw blade diameter range: ￠200- ￠1200mm |
| Saw blade aperture: ￠10-220mm |
| Saw blade thickness (steel plate): 1-12mm |
| Tooth pitch: 7-110mm |
| Tooth surface angle: 5 degrees to+20 degrees |
| Tooth top back angle: 1-20 degrees |
| Left and right inclination of teeth: tooth tip/tooth surface 20 degrees |
| Blade grinding stroke range: maximum 25mm (adjustable) teeth/minute |
| Grinding speed: 0.5-6mm/s |
| Working speed: maximum 20 teeth/minute |
| Grinding wheel size (outer diameter x hole): (￠ 125mm x ￠ 32mmX1mm) |
| Negative chamfer grinding: -15 degrees |
| Grinding wheel linear speed: 26m/s |
| Flow rate of coolant water pump: 501/min |
| Volume of coolant cylinder: 85L |
| Total power: 1.85 kW |
| Voltage: three-phase 380v |
| Mechanical weight: 800KG |
| Mechanical dimensions (length x width x height): 1600X1100X1800mm |
| |
| Technical features: |
| |
| 1. This equipment can grind aluminum TCT cutting TCT saw blades, woodworking saw blades, and large alloy saw blades. It is easy to operate and can fully extend the service life of alloy saw blades. Each blade can be reused 15-30 times. This equipment has received praise from many buyers. |
Product Tags:
|
|
150-1200MM TCT Circular Saw Blade Front And Rear Angle Grinding Machine Images
|
